Want this question answered?
under the back seat
Remove the belt from your 1990 Acura Legend alternator. Remove the wiring harness from the back of the alternator. Remove the alternator retaining bolts. Reverse the process to install the new alternator.
The camshaft position sensor on a 1991 Acura Legend is located at the back of the camshaft, near the rear bearing cap. It monitors the rotation of the camshaft and relays this information to the vehicle's computer.
Haynes Manuals Contain Wiring Diagrams in the back of the book.
It's behind the back seat on the driver's side.
The oil pan on a 1995 Acura Legend is changed by draining the oil, removing the retaining bolts, and lowering it from the engine. The components are then cleans, a new gasket installed, and the pan bolted back in place.
I have an 95 Legend and when I step on the brakes I cant shift from park. Also I have no brake lights in the back as well. I checked all the fuses and they are goood. What to do?
1995 Acura Integra probably doesn't have a distributor, it would have coil packs, follow your spark plug wires from the spark plugs back. where the spark plug wires stop that's what has taken the place of your distributor. Its computer controlled the computer is probably under the dash on the passenger side of the car
inside the engine compartment on the drivers side back by the firewall next to the brake master cylinder and diaphram.
Remove the four bolts on the bottom of the seat back and the 2 bolts on each headrest. Take out the headrests. Lift straight up.
You hav to remove the inst. cluster and them disassemble it (just remove the back plate) and you will find the bulb in there.
i no in my 93 that right behide the back seat you have to move all the carpet and cardboard out the truck and you will find it behide the seat