you go to the bear ville build a bear workshop and click the bear named champ and click bring furry friends to life on line
If the key looks like a circuit board, try the slot underneath the steering wheel.
If you have a key code security system, you need to have the computer relearn the key code sensor serial number.
Here's a web site that you put the serial number into then your email address and they send you your key code it worked for me. Hope this helps http://www.radio-code.co.uk/ford-radio-codes.html The code is 3265 Dont pay for key codes hallo serial number M019104 cd 6000 cd
can i put my vin number of my four wheeler on my four wheeler key
hi mate to reset the key code on the mondeo you have to have the red key put the red key in the ignition turn the key to number 3 and back 4 times within 3 secs the red light will stay on the dash the car is in learn mode take the red key out put what key you want to program in and turn it to number 3 and back then use it to start the car job done it worked for so good luck but you must have the red key if not ford will be the only ones that will be able to help
put the number code to 000 then press the button to the left and stick a key on the bottom of the lock and push it up and it will release the hook holding the grip.
put the number code to 000 then press the button to the left and stick a key on the bottom of the lock and push it up and it will release the hook holding the grip.
If you have the code to disable the immobilizer, put it in then press the button to unlock the doors until you hear it click three times remove the key and point towards the receiver above rearview mirror and press button on key very quickly ( has to get three good signals) then key should work normally. You may have to try this a number of times but each time the immobilizer MUST have kicked in needing you to put in the code
code number
im sorry but you can only put in an animal id and key code only if you have a buildabear
put the number code to 000 then press the button to the left and stick a key on the bottom of the lock and push it up and it will release the hook holding the grip.
look at your translation key while you put in the code. what you're supposed to type is OPEN, but you have symbols, so use the translation key. :)