answersLogoWhite

0


Best Answer

1. turn ignition on (dash warning lights on)

2. If radio turned on, turn it off.

3. Press AS button in, and hold it in while turning radio on.

4. Wait approx 10 seconds (do not release AS button).

5. Radio should beep, and display should now read 10 - - - - (assuming no tries have been made in the past with the wrong code)

6. use pre-set button "1" to scroll the first digit in the display to the number you want (it goes 0,1,2,3,4,5,6,7,8,9 then back to 0)

7. Use pre-set "2" for second digit, etc.

8. Once display reads 10 followed by the four digit security code press and hold AS button for about 10 seconds, until the radio beeps.

9. If correct code entered display will now read "code" briefly, followed by"memory-U" briefly, then radio will reprogram it self.

10. If radio goes back to "safe" the code number is incorrect, or you mis-keyed it.

Note: entering the code incorrectly 10 times will render the radio useless.

After the first 3 tries you need to leave the radio on and the ignition on for increasingly long periods of time before it will let you try again. 7 safe need you to wait at least 30 mins, and more like 1 hour.

User Avatar

Wiki User

16y ago
This answer is:
User Avatar

Add your answer:

Earn +20 pts
Q: How do you put your code into your radio on your Vauxhall if it is in safe mode?
Write your answer...
Submit
Still have questions?
magnify glass
imp
Related questions

How do you enter a radio code in zafira when radio says safe?

i have brought a car but the radio is showing safe mode and unfortunately i do not have a code are you able to supply the code radio is blaupunk 300 car is a vauxhall zafira 2002


How do you put your code into your radio on your Vauxhall Astra if it is in safe mode?

I Have a Astra Mark 4 vr500 radio please can you tell me how to entre the code Type your answer here...


How do you put your code into radio on your vauxhall omega 02?

radio says safe but cant put the code in


How can you get your Audi A6 radio off safe mode?

You need your operator's folder. In there is a booklet about the radio. it will have a code you need to enter to get the radio out of "safe" mode. the code is unique to each radio and car.


How do you use the radio code to use it after it has been in safe mode?

Turn the ignition to the on position but do not start the engine. Leave it sitting like that for one hour. The radio should then switch out of safe mode and allow you to enter the correct code.


How do you get the radio out of safe mode if you don't have the owner's manual for a 1997 VW Cabriolet?

Take the radio out of the dashboard, the code is on the side of the radio.


How do you get a 1996 Audi A6 radio off safe mode?

I have an 1996 Audi Quattro A6 i changed my batteri and my radio went to safe mode. How do i get my radio off safe mode?


How do you get seat ibiza radio out of safe mode?

You have to Leave it on for a hour with the engine off then it will let you reinput the code


How do you get the radio in a 1995 VW Jetta out of safe mode after replacing the battery?

you have to enter the 4 digit safe code found in your owners manual


Where can the code be found for a 1998 Volkswagen Jetta radio in safe mode?

The Code is on the Radio, or in the Spare tirewell! if it is not on the radio, remove the radio, call dealer and give them the radio serial number and your VIN number. Some Dealers like to charge for this, most do not.


My 2000 Volkswagen Cabrio Convertible's radio is in safe mode and I need to find out how to get it out?

If you don't have the manual (which will have the code in the section for the stereo) call the Delaership with the car's VIN and they can look up the safe code


How can you find the radio code for an Audi tt quattro radio has gone to safe mode and I cannot find code?

The Radio "Anti-theft" code use to given from dealer ( first owner bought the car) If you don't have or lots the code you only can get the code from dealer. In manual book "Audio Symphony" book have the radio code it calls "Radio card"