i have brought a car but the radio is showing safe mode and unfortunately i do not have a code are you able to supply the code radio is blaupunk 300 car is a vauxhall zafira 2002
You need your operator's folder. In there is a booklet about the radio. it will have a code you need to enter to get the radio out of "safe" mode. the code is unique to each radio and car.
Usaully by the numbers on it if it doesnt have number buttons try the knob
you must re enter the security code for the radio to work
you have to enter the 4 digit safe code found in your owners manual
Turn the ignition to the on position but do not start the engine. Leave it sitting like that for one hour. The radio should then switch out of safe mode and allow you to enter the correct code.
Turn the radio off, press AS and hold, press on button. 7safe comes up but leave it in n this mode for about 10 minutes or so then as if by magic the code - - - - comes up. Enter code as normal and radio ok. woot :-)
radio says safe but cant put the code in
Switch on ignition then switch on radio whilst holding down the AS button. A number indicating how many code tries you have left followed by 4 dashes should then be displayed (e.g.10 - - - -) Enter the code using keys 1-4 i.e. if your code is 5312 then press 1,1,1,1,1 to enter "5" then 2,2,2 to enter the "3", then 3 to enter the "1" and then 4,4 to enter the "2"Hope this helps, just remember to hold the AS button while switching on the radio. It took me a while to figure out why it wasn't working because I was pressing and holding AS while radio was on and showing "SAFE."
p=[
Turn on radio - the word SAFE will appear in the display. Press th P.SCAN and RBDS buttons simultaneously and hold them down until "1000" lights up in the display.Release buttons.Do not, under no circumtances, continue holding them down or press them once again. This will cause the radio to consider the number 1000 to be the input code.Use station buttons 1,2,3,and 4 to enter the code number on your Radio Card. Use the button 1 to enter the first number 2 for the second number 3 for the third number and 4 for the last number.Once you have entered the code and it shows on the display,press the P.SCAN and RBDS buttons down again simultaneously and hold them down until the word SAFE appears in the display.Release buttons. Soon afterwards a frequency will be displayed.
To change the code on Youniverse safe, press the enter key on the display screen. Red light will blink and the current code will be displayed. Input the new code and press enter.
Enter in the radio code that should be in your owners manual. Use the pre-set radio buttons 1,2,3,4 to enter in the code and then hold the right seek button > for two seconds until you here a beep. The radio display should read 88.8 or soemthing like that. If you can't find the code go to the VW dealer and bring your ownership papers with your car serial number...