I really don't understand the question. But I did have the problem where the handbrake was not fully releasing on a 1994 Geo Prizm. (I think the brake light stayed on). In order to solve this had to clean the rear drun brakes of brake-pad dust and buildup.
1. Set the car in gear and put wheel chocks on the tires to keep the car stationary.
2. Loosen the lug nuts on the rear tires.
3. Jack up the car. Put a kack stand under the car to be safe.
4. Remove the rear tire.
5. Place wet newspaper underneath the brake drun to collect any dust which falls when you remove the brake drum.
6. Remove the brake drum. The hand-brake was to be released at this step.
7. Don't blow on the exposed brake pads! Use brake cleaner to remove dust. Also clean out the brake drum.
8. Replace the brake drum
9. Replace the tire and put the lug nuts on finger tight/light torque. Don't try to tighten at this stage.
10. Lower the car and torque to spec (80 ft-lbs).
Anti lock brake systems were optional on all 1997 Geo Prizm cars. One way to know if the car has an ABS system is when the ignition is turned on. The ABS light will briefly come on when the car is started.
Same as on every other car.
your mama
AnswerOnce you put the car in "D" the brake will automatically release.If the brake does not release there is an emergency release, which is a small lever attached at the top of the parking brake pedal. Pull it up and the brake should release.
The 1997 Chevrolet Blazer OBD 2 port is on lower edge of dash; right of parking brake
you need to change the multifunctional switchthis happened to mine to
Follow the brake lines from the master cylinder, they will lead you right to the ABS module.
* It could be a blown fuse or * the brake light switch on top of the brake pedal under the dash is bad or * the turn signal switch is bad.
u have to pull the emergency brake just past the point you set it and then press the button .... this should release and unlock the brake.
Geo Prizm door handles are the same 1993-1997
This was for a 1994 but try searching here. How do you Change a fan belt on 94 prizm?
It requires a special tool that can be purchased at a parts store.