Want this question answered?
Remove the gas cap and that will relieve pressure in the tank. There is a Schroeder valve on the fuel injector rail. Use that to relieve pressure at the injectors.
You must drop the fuel tank.
45-55 lbs...
It is located under the car on the frame just in front of the wheel. First you will need to relieve the fuel pressure. Then you will need to unscrew the fuel lines and remove it.
To relieve the fuel pressure on a Chevrolet S10, the fuel pump relay should first be removed. Then, the engine should be startedand run until it stalls.
the fuel pump should be located underneath the rear passenger seat but first you must disconnect the battery relieve the fuel pressure before you embark on removing it
The fuel pressure regulator is part of the fuel pump on a 1996 Plymouth Voyager.
First loosen the gas cap and relieve any pressure in the tank. Now look on the fuel rail for a schrader valve and push it to relieve the pressure. It will look like a tire valve. If you find none, then just be prepared for a spray of fuel when you disconnect the fuel line. Wrap it with a rag to prevent the spray.
easy way to relieve the fuel pressure is to remove the fuel pump fuse. after that start vehicle up. vehicle will run out of gas. the pressure is relieve,
In the gas. Of course.
From 87 to 95 did not have them. You will have to crack the fuel line alittle to relieve fuel pressure.
allows you to attach a fuel pressure gauge to check fuel pressure, you can also use it to relieve the fuel pressure during maintenance