Is it a constant high idle? First place to look is the throttle wire connecting to the throttle body. It should be tight, but not pulling the throttle plates out of alignment. also might want to consider the grade of fuel you're using (sometimes a fuel system cleaner additive can help).
If low beams do not work and the high beams of a Mitsubishi Eclipse do, it is probably due to a corroded connector. Simply clean the connector and add some petroleum jelly to the terminals.
vaccum leak somewhere. or a boost leak Spyda
The low beams use 9006 and the high beams use 9005.
Mobile One Synthetic for High Milage engines
Check the compression for the cylinders on the Eclipse. If there is?æa leak in one of the cylinders then this could cause the jerking.
I think 5w30 if you don't have too high mileage. If you do have high mileage on your car then it's not a bad idea to use oil with higher viscosity, for instance 10w30.
On my '98 GSX it's .032.AnswerThe manufacture of the plug you buy for you car (your Mitsubishi) should come 'Pre Gaped' ie; no need to gap them. I have or my car has a Mitsubishi engine in it and I use NGK plugs for it. You'll find NGK's in most Motorcycle engines and other high rev engines. IMO....Just spoke with the auto parts store. The gap for a 1995 Eclipse RS is .044
People call it "sporty" because of huge engine roll and relatively high weight. But insurance companies see it as a sport car.
Once on 1-2 year on regular spark plugs. Once every there years on High end spark plugs.
The Mitsubishi Outlander, Mitsubishi Galant, Mitsubishi i, Mitsubishi Outlander Sport and Mitsubishi Lancer and Lancer Performance all have high user reviews.
go to your nearest Mitsubishi dealer and request a high beam light replacement.
Yes, you can. There is a special liquid designed to clean the engine. Also you can hose the engine. Just make sure that you use home type water pressure not high pressure.