First, Let me say that an original Harley service manual is your friend.
I have a 2007 Dyna Superglide Custom. Facing the bike from the right (battery) side, remove the one screw on the bottom part of the battery box cover. Remove the negative cable screw. Remove the positive cable screw. Take care not to lose the star washers for each cable connect. Undo the rubber strap holding in the battery.
Pull the battery out.
Reverse the process to install the new battery.
battery removal of 2004 harley dyna
remove seat. remove two bolts holding bracket on left side of battery tray remove top bolt visible after seat is removed in step 1 disconnect battery leads remove battery
how do you remove the back wheel on a 2005 Harley Davidson Dyna low rider FXDL
Let engine cool. Remove dipstick/fill plug. Remove oil filter. Remove drain plug (underside of bike).
To do this, you must have the manual.
2 bolts to the left of the battery box. One is below the ignition (goes up and down) the other is directly below that (screws out from the bike). Loosen and remove the screws and battery box will drop down and chrome peices will pull out.
Harley Davidson Dyna super glide sport-Jax,Opie harley Davidson Dyna glide-Clay,chibs,bobby Harley Davidson Dyna street bob-Tig
It came out in on the Dyna glide in 2006, all other models had it in 2007.
Look underneath the bike by the kickstand spring stud.
ALL Twin Cam engine plugs are a .040 gap
The Harley Davidson Dyna is one of the motorcycle company's newest models. According to Harley Davidson, the specifications for the Dyna show a dry weight (this means it does not contain fluids such as oil and gas) of 639 pounds.
Your local Harley Davidson dealer will be the best place to find a new or used Harley Dyna. To find a list of your local Harley dealers, check your local yellow pages.