Removing the valve covers on an E series Ford van can be a challange. I have read many accounts where people are suggesting raising the body off the frame or removing the engine. Yes, these are effective ways to access the covers but easier said than done. The fastest way that I found is to support the engine with a jack and remove the motor mounts on both sides. This will allow the engine to drop down a good inch or more and will allow you to remove the covers with a little twisting and turning. A tip to make it easier is to remove the bolts and groumets from the cover as they tend to hook on things as you pull the covers, also you have to pull the covers out the front of the engine as the cam gear is in the way. Good luck, jims grey garage.
Take off the camshaft.
Below and to the left of the steering wheel , by the brake pedal Remove panel cover to access the fuses
Schrader valve on fuel rail.
yes
Where is the computer located in the 1995 ford e250 4.9l engine
Use a strap wrench around the base.
remove cover off the steering wheel maybe 4 screws look for loos or undone wires. if you have a steering colume that goes up and down they get disconneccted easy. look at your fuses.
where is the crank sensor located on a ford e250 1999
where do you find horn fuse on 1993 e250 ford van
There is a molded in or, sticker diagram on the inside of the fuse box cover
ford van 2013 E250 inide lights wont work
WHERE is the blower motor fuse on a 1999 ford e250 4.2 L