To remove Thompson's Water Seal from brick, you can use a pressure washer with a high-pressure nozzle or a chemical stripper specifically designed for masonry surfaces. Follow the instructions on the stripper and wear protective gear to ensure safety. It may take some effort and multiple applications to fully remove the sealant.
Not the original solvent based Thompsons Water Seal. Latex primer is water based and oil and water don't mix; they would seperate.
Civialian Conservation Corp
yes with thompsons waterseal yes with thompsons waterseal
Most people don't recommend waterproofing for a cedar fence as it doesn't need it. If a waterproofer is used Thompsons Water Seal is the best brand.
sure why not
yes, you have. And change new seal too.
Remove the you joint and driveshaft. Remove the rear end seal plate. Remove the seal and bearing. Reverse the process to install the new seal.
what kind of wood it is will determin what to use. You can use thompsons water seal at the least for outdoors or sand and sealer for interior. Many types of sealers at lowes and easy to find right appilcations too
Front seal: remove engine or transmission and replace the seal. Rear seal, remove the drive shaft to replace the seal. Unfortunately, you typically only have problems with the front seal.
Remove the tire and wheel. Remove the axle end cap. Remove the axle seal with a seal puller. Reverse the process to install the new axle seal.
Use refractory cement.... see above
To "seal water" out. Pun.