how to remove two way slideing door careo cabinet
To replace a cabinet hinge, you must first remove the screws that attach to the door with either a screwdriver or a drill with screw bit. Next you want to remove the cabinet door. Once you have removed the door, remove the hinge from the cabinet. You can then attach a new hinge. A nice tip is to have a partner hold the door while you screw the hinge back in place.
by sliding the handle rearward
To remove the sliding door panel on a Dodge Grand Caravan begin by removing the top plastic panel. Then remove the bottom piece after unscrewing a few screws located on the bottom half of the vans door panel.
I assume you mean such as a Pocket or Hide away door? You can look on Rockler.com http://www.rockler.com/search_results.cfm?filter=pocket+door This may be some what of what you are looking for. Or if you want like a glass sliding door look here: http://www.cabinetware.com/Track.asp
Remove the door trim panel. Remove the inside door handle rod. Remove the inside door handle retaining rivets. Remove the inside door handle from the door by sliding the handle rearward.
The 1994 Nissan Quest sliding door panel is held in place with 12 retaining clips and for retaining bolts. Remove the retaining bolts and pry outward on each retaining clip.
This is not an easily undertaken project. If the sliding door is one known more commonly as a 'Pocket door' (slides into wall) you can do yourself a favor and employ a contractor as it becomes necessary to sometimes remove and replace a section of drywall to gain access for repair. If this door is a sliding closet door you should consult the manufacturer or their web site.
You need to remove the sliding door, then remove the screws from the bottom of the track, then remove the screw from the front of the track and slide the cover forward. There is a bar that pinches the metal from the cover and locks it in the channel. You need to slide the cover forward to unlock it then it just pops out.
you have to remove the inside panels to get at the latch to open
look inthe door jam of the door your working on. find the rivittward the bottom. remove the door panel, and unplug the door lockmotor. drill out the rivit and remove the motor by lifting forward and watching the hook sliding it from the door latch assembly.
remove panel from inside door. remove bolts holding brackets at the side then the top, have a few people help support the door as you lift it free.
Sell the car without power sliding door , and buy one with.