A window winder is also called a window crank. These cranks are used on manual windows. Power windows use a power switch to run the window. Usually these cranks are held in place by a screw hidden behind a cap where the crank rotates, or there is a hidden clip behind where it rotates. If there is a hidden clip you will need a special tool that most mechanics will have if they are nice enough they will let you borrow it for a few minutes. Or a local parts store would sell this tool. Be careful when you use the tool those clips will fly across the parking lot and you will loose it. Try to push it behind the rotating crank slowly and cover it with your hands as you do this. It will help prevent you from losing the clip good luck.
take it to the garage
How to remove Window Winder Handles from VZ Holden Commodore
Begin by removing the inside door panel. Remove the linkage from the window winder. Remove the window winder retaining bolts. The window winder will come off.
remove the tiny C clip from under the winder 1.25 1996 N. don't rip it off like I did.
Between the window winder and door card there should be a plastic ring about 8mm wide. Push this ring away from the end of the window winder. The windes should now slide off
Just pull it!
take it to safelite lol
With a knife. A sharp one.
There is a pillow in the middle that will be snug in the winder so that the watch will not fall out. Remove the pillow and place the watch around the pillow. The pillow will fit snug back into the watch winder with your watch on it while the watch is wound.
purchase a 'door trim removal tool' from any auto shop and jam it under the retainer under the winder. this will allow the winder to be slid off its nipple.
There is a really thin horseshoe shaped circlip behind the winder handle . Use a screwdriver to gently lever the winder away from the panel and then use a small thin screwdriver to try and unhook the circlip . A bit awkward but trust me it will come off .
James Winder's birth name is James Bernard Winder Jr..