You need to remove the inside panel, where the arm rest and the control switches are. 2 screws under the arm rest then the pannel is held by snap in pins. After removing the inside panel, you will have access to 3 screws holding the mirror, this applies to the passenger side too. You may need to buy new snap in pins from Strauss or Autozone to replace the old ones that get damage when removing the panel.
Remove the inside door panel from your 1991 Chevrolet 1500 pickup truck. Remove the wiring harness from the mirror. Remove the driver side mirror retaining bolts. Reverse the process to install the new driver side mirror.
carefully grab the mirror and give it a tug carefull not breaking it, once it is off you can access the motor
Remove the dppr panel and there are screws on the inside.
How to Remove the Steering wheel From a Chevy Blazer 2001
how do you remove the dashboard of a 2002 Chevy blazer
fuses box located driver side between the door and the dashboard at rearview mirror level....have fun! Rocco 95
how do you replace seatbelt retractor on a 2000 chevy blazer
There is a small screw...torx or Allen head that holds it to the mount. Loosen this and slide the mirror up. Comes right off.
The fuel gauge fuse on 1998 Chevy blazer is located in the front of the blazer. It is on the driver side next to the hook latch.
i recently had to replace the passenger side mirror of my 93 blazer, at first i attempted to fix the white mirror mounts behind the glass, but they wouldn't sit right after some frustration i decided to go to the junk yard and pay $10 for a new power mirror, this is most likely ur best bet
on a 1997 blazer, how to remove drivers side mirror under your handle to close the door is two 7mm bolt and behind your handle to open the door is a Philips screw and that plate behind it comes off then CAREFULLY remove the door panel trust me you don't want to break the plastic then you will see your mirror bolts and electrical wiring
Behind Driver Side Wheel