Want this question answered?
With a BFH ( Big Friggen Hammer)
1. Remove the brake hose to caliper bolt from the brake caliper. 2. Remove the brake hose from the brake caliper. 3. Remove and discard the 2 copper brake hose gaskets. These gaskets may be stuck to the brake caliper and/or the brake hose end. 4. Cap or plug the opening in the brake caliper and the brake hose to prevent fluid loss and contamination. 5. Remove the 2 brake caliper pin bolts. Remove the park brake cable from the caliper. 6. Remove the brake caliper from the brake caliper bracket.
Remove wheel Loosen flexible brake line Remove mounting bolts (2) usually either TORX or ALLEN Slide out Remove and Plug brake line Be sure to use NEW copper gaskets upon installation
Remove the tire and wheel from your 2002 Pontiac Grand Prix. Remove the spring from the brake shoe. Remove the brake shoes. Reverse the process to install the new brakes.
You will need to remove the tire and wheel from your 1998 Pontiac Grand Am. Remove the brake assembly spring from the brake pads. The brake pads will come off. Reverse the process to install the new brake pads.
Remove brake caliper and then caliper mounting frame . Rotor is now free.
Remove wheels Re-install 2 lug nuts to hold rotor in place Remove caliper mounting bolts Slide caliper off rotor Use a "C" clamp to fully retract piston into caliper body Replace inner and outer pads Re-install caliper PUMP BRAKE PEDAL TO SET PADS AGAINST ROTOR PRIOR TO MOVING VEHICLE
Lift the car, remove the tire, remove the brake shoe and caliper, and remove the old brake pad. Dispose of the old brake pad, put in the new brake pad, replace the brake shoe/caliper, replace the tire and lower the car to the ground.
with a tool that looks like a cube and you attach to a ratchet
Remove wheel, remove the two bolts in the calipers, pull up calipers, remove pads compress caliper piston with a c-clamp, be sure to have the brake fluid cap off the reservoir under the hood. - replace pads and reverse the order.
Remove wheels Re-install 2 lug nuts to hold rotor in place Remove caliper mounting bolts Slide caliper off rotor Use a "C" clamp to fully retract piston into caliper body Install new inner and outer pads Re-install caliper PUMP BRAKE PEDAL TO SET PADS AGAINST ROTOR PRIOR TO MOVING VEHICLE
Lift the vehicle on a car jack, remove the tire and set aside, remove the brake shoe/caliper and remove the old brake pad. Next, dispose of the old brake pad, put in the new brake pads, put the brake shoe/caliper back on, put the tire back in its place and lower the car.