answersLogoWhite
Pontiac Grand Am
Pontiac Grand Prix
Grand Am SE

How do you replace the front brake pads of a Pontiac Grand Prix?

313233

Top Answer
User Avatar
Wiki User
2007-09-27 13:02:23
2007-09-27 13:02:23

Remove wheel, remove the two bolts in the calipers, pull up calipers,

remove pads compress caliper piston with a c-clamp, be sure to have the brake fluid cap off the reservoir under the hood. - replace pads and reverse the order.

1

Related Questions

User Avatar

change front coil spring on 2000 Pontiac grand am

User Avatar

To replace the brakes, lift the car on a jack, remove the tire, brake shoe and old brake pad. Next put in the new brake pads, put the brake shoe and tire back on the car, and lower the car.

User Avatar

pictures of how to change front signal bulbs on a 2004 grand prix pontiac

User Avatar

it cost me 650$ for new front calipers and discs, they seased up

User Avatar

Start at right rear, then left rear, right front, and end at left front.

User Avatar

The front speakers on a 2000 Pontiac Grand Am are 4x6. The rear speakers on a Pontiac Grand Am are 6x9.

User Avatar

underneith the front bumber twist counter clockwise replace bulb

User Avatar

no their not front wheel drive you must be thinking of a Pontiac grand am or a grand prix

User Avatar

How do you do a front-end alignment on a 1994 pontiac grand prix?

User Avatar

How much it will cost to replace the front brake pads on a Jeep Grand Cherokee depends on which brakes you choose and whether you putting them on yourself. You should expect to pay between 100.00 and 300.00 dollars.

User Avatar

An Allen screw is not likely in that period Pontiac. Try 15 mm regular wrench.

User Avatar

Remove the wheel, from the car. Remove the brake caliper, from the rotor. Check the rotor, for grooving,glazing, and warpage, also thickness. If any of this is present, have the rotor turned, or replaced. Then replace the brake pads, with new ones. Make sure the brake pads are compatible with the rotors that you are using.

User Avatar

The tools required to replace a front brake pad and rotors on a 2000 Jeep Grand are lug wrenches, a jack, jack stands, and a C-clamp. You also will need a wrench and a turkey baster for drawing out old brake fluid.

User Avatar

i have a probleme whit my 1996 grand am i cant change the plug cause there a bar on front of it

User Avatar

How to replace front brake pads on Mercedes s430

User Avatar

Visit the forums at genvibe.com. There is a nice walk through with brakes to service your front brakes.

User Avatar

Unless the caliper is broken, you can just replace the brake pads.

User Avatar

How do you replace a 1996 Grand Prix front bumper?

User Avatar

caliper piston does not retract with moderate C-clamp pressure - not willing to force it

User Avatar

One lifts the car on a car jack, removes the tires, remove the brake shoe, remove and replace the brake pad. Then one has to replace the brake shoe in the correct position, then put the tired back on the car.

User Avatar

I have a 99 grand am and I am tring to replace the brakes on the front of my car but when I go to put the brakes back on the caliper wont line up wheats wrong with this? How do I fix this?

User Avatar

The front door speakers on a 2000 Pontiac Grand Am Se are 4x6. The rear deck speakers are 6x9.

User Avatar

take the light off and put the other one in you jack@$$


Copyright © 2020 Multiply Media, LLC. All Rights Reserved. The material on this site can not be reproduced, distributed, transmitted, cached or otherwise used, except with prior written permission of Multiply.