1. Remove fuel tank. 2. Disconnect throttle cables 3. Remove side covers 4. Remove air-filter case under seat 5. At top of air-box (between filter box and carbs) there are 2 bolts with 10mm hex heads, remove these. 6. Remove crankcase vent hose from the air-box 7. Loosen clamps for rubber boots from air-box to carbs as well as the clamps on rubber manifolds to engine 8. Slide air-box away from carbs 9. With a rocking motion, pull carbs rearwards from engine. The carbs will come out from manifolds 10. Rock carbs with engine end pointing up, gently but firmly work the carbs out to the right side of the bike.
Remove all vacuum lines connected to carb. Remove shift linkage and accelerator linkage Remove mounting bolts Remove Carb.
a hammer
The Suzuki GS1000 is a motorcycle manufactured by the Suzuki company. The Suzuki GS1000 motorcycle was first introduced in the year 1997 in America and Japan.
This is a case and it has no memory.
(1) Remove the air filter and housing (2) Loosen the cable bracket (3) Remove the throttle and choke cables from the carburetor (4) Remove the governor spring from the carburetor (5) Remove the two bolts that fasten the carburetor to the engine. CAUTION: Do not stretch or bend the governor spring while removing or re-installing.
how do you remove the old carburetor form a 1984 ford f150 4.9
In most cases, you can locate the carburetor screws in the front of the carburetor. Sometimes you have to remove the air gilter to get to to the carburetor.
To clean the carburetor on a 2005 Honda TRX450R , you will need a Philips head screw driver and carburetor cleaner along with patients. Follow these simple instructions: Remove the front plastics, fuel tank and take shroud. Using a Philips head screwdriver, remove the two brackets. Then remove the carburetor and the float on the bottom. Remove the jets and either spray or soak in carburetor cleaner. Hint: if you see daylight through the jets, they are clean.
Get The Haynes manuel.
How to take off the carburetor off a cub cadet snowblower 305cc 30 in cut. Take the out side cover off of the carburetor
To clean the carburetor on the 1979 Suzuki GS550, it is a good idea to empty the carburetor and remove all fuel lines. Then, replace the float and valve in the carburetor and clean the bowl. Fill the carburetor with fuel and flush several times.Ê
If it has a Rochester carburetor (like the quadrajet) it is actually located inside the carburetor where the fuel line attaches to the carburetor. To access it, remove the fuel line then remove the filter housing by loosening the large hex bolt you just removed the fuel line from.
The Suzuki GS1000 is a vintage motorcycle. They are a line of Suzuki motorcycles. They have air-cooled parallel-twin. They also have inline four engines with two or four valves for each cylinder.
remove the manifolds first you my want to remove the seat firat