You cut the bulb a little bit
Remove the adhesive.
Bad news. I have found it impossible to remove the bolt caps without breaking them. They are mortared on. They do make plastic bolt caps in a lot of different colors.
dettol works
If you let the concrete dry on the ceramic, they have bonded. You can try to chisel it loose.
It depends on the type of ceramic adhesive. Many of them can be taken off tile with lacquer thinner on a rag.
You can remove stains on ceramic tiles with bleach. Put on gloves and use straight bleach with a scrub brush. After you get the stain off, clean the area with a mild soap and rinse.
Hi, You can use solvent or stripping agent to remove rock Salt from Ceramic Tiles. Here is an article about Ceramic Tiles on link: http://www.gharexpert.com/articles/Flooring-1497/Designing-Floors-with-Ceramic-Tiles_0.aspx?PL=2&ArticleID=1497&CatID=2&Count=-1&Tot_Rec=16&Page_Id=&Estimator= Thanks and enjoy
The cost of the removal of a ceramic tiled floor can vary depending on the company used and size of the area that the floor covers. It is best to call different contractors to obtain estimates before settling on one. One may also save some money by breaking the tiles up themselves, and then hiring someone to remove the grout.
Put some ice in the ceramic bowl and let it sit for a while then put the bottom of the metal in hot water. Don't let the hot water get to the ceramic. The ice will shrink the ceramic and the hot water will expand the metal. They should come apart.
WD 40 and a razor blade.
CLR its found at most harware stores. scouring stone
You can freeze it with a ice cube and then scrape it off with a putty knife.