you need to take off the rotor and caliper and braket of course, take the axel nut off. Take the three bolts out of the wheel bearing and pull the wheel bearing out. Then the cv joint should come right out. You may need to put a flat pry bar behind the cv joint and the front diff to pop it out.
unscrew it unscrew it unscrew it unscrew it
On a 1997 Ford Expedition : ( NO ) not on the front suspension It could have the REAR load levelling air suspension
Front and Rear are 5x7
62oz if it has front and rear ac
On a 1997 Ford Expedition : The washer fluid reservoir is in the engine compartment , between the battery and the front of the vehicle ( the reservoir is used for the front windshield and the rear liftgate glass )
1997-98 Pontiac Grand Am front lower ball joint. This is part of the steering and front suspension of the vehicle.
My 1997 Expedition uses a 35mm Socket. Paid $16 at Checkers for one.
Driver's side front
On a 1997 Ford Expedition ( 4.6 and 5.4 ) firewall 4 - 8 3 - 7 2 - 6 1 - 5 front of vehicle
Front & Rear Doors take only 6x8 speakers
it is under front bumper on drivers side...this is on a 1997 expedition 4x4
Unscrew it.