get a lug lock kit at any auto parts store!!
with the lug wrench!
To remove the seats from a 1995 Corvette, you will need to remove the front and rear nuts from the seat frame studs. You will?æalso need to remove the lug wrench that is attached to the seat frame studs.
A website named bransport.com carries lug nut removers for various size lug nut locks. It uses a reverse thread that tightens on the lug nut as you turn it counter clockwise to remove.
year 25thn addition 78 corvette L81,
the lug nut adapter is located in the trunk with your jack, spare, and lug wrench, if you have taken it to a shop they may have put the adapter in your glove box, its about twice the size of a lug nut.
Yes
There should be a lock ring on the axle that prevents the wheel from sliding off while in service. Remove the lock ring and slide the wheel off the axle. You may need a lock rings pliers to remove it, or you might be able to do it with a small screw driver.
Off = counterclockwise, on= clockwise. Same as say, a lid for a bottle.
5 x 120mm or 4.75"
100lbs
Put the key in the lug nut lock and keep turning it until the entire locking lug nut cover assembly comes off...just keep turning it clockwise with the key until the whole thing comes off. Then use the lug wrench to remove the lug nut that is holding on the spare tire cover. Remove the cover and then take the other lug nuts off.
Where is the spare tire located on a 1987 Corvette? Under the back of the car below the CORVETTE, use the lug wrench to lower it the jack is on top of the tire.