According to Auto Repair Reference Center, a database available to our library cardholders: == To Remove: # Remove or disconnect the following: #* Upper radiator fan shroud, if necessary #* Battery junction block from pump bracket, if necessary #* Drive belt #* Pulley #* Nut and clamp retaining the filler neck to the Power Steering pump, if equipped # Place a drain pan under the pump # Remove or disconnect the following #* Hoses from the pump #* Bolts from the rear of the pump #* Bolts from the front of the pump #* Pump from the vehicle Power steering pump - 4.8L, 5.3L and 6.0L engines shown To Install: # Install or connect the following: #* Power steering pump #* Bolts to the front and the rear of the pump and tighten the bolts; Torque to: 37 ft. lbs. (50 Nm) #* Hoses to the pump and tighten the nut; Torque to: 20 ft. lbs. (28 Nm) #* Nut and clamp retaining the filler neck to the power steering pump, if equipped #* Install the pulley with 0.5 mm (0.020 in) play #* Drive belt #* Battery junction block from pump bracket #* Upper radiator shroud # Fill and bleed the power steering system # Test drive the vehicle to confirm the repairs The information contained in this database comes from Chilton's repair manuals.
Ok
The power steering reservoir is mounted on top of the power steering pump.
How do you remove power steering pulley on a 1990 ck truck
steering colm for 1989chev silverado
It's on the coolant reservoir.
injectors 6.6 Chevy silverado
You can add power steering fluid to your 1988 Chevy Astro by removing the top to the power steering fluid reservoir. Pour the fluid directly into the reservoir.
on the power steering pump.
the power steering reservoir
Generally the power steering pump and reservoir are one.
There shouldn't be one. In 2004 Chevy went with electronic motor assisted steering.
How to remove steering wheel on Chevy lumina 2000
How to remove steering wheel on a 2001 chevy tohoe