It's pretty simple, just disconnect the wiring to the license plate light, and disconnect any wiring harness routing clips from the bumper. Then you remove the 3 bolts from each side that hold the bumper to the frame rails. I would estimate that it's about a 30 minute job if you're mechanically inclined. If you find that the nuts are too rusted to remove, spend $5-10 on a nut splitter (every mechanic should own one anyways) and replace the nuts and bolts later. After removing the nuts and before removing the bolts, you may wish to have a friend help you support and remove the bumper.
how to remove front bumper 2002 Impala
Where is Pcv on 4.7 2002 dodge dakota
Yes
For the 98 it is right behind the front bumper between the driver side headlight and the radiator. Sorry if this doesn't help.
They are under the coils. You have to remove the coils to access.
No the tail gate will not fit, they are different
6,650 lbs trailer weight with the 4.7L, and a tow package. Only 2,000 lbs trailer weight using the bumper hitch.
6,650 lbs trailer weight with the 4.7L, and a tow package. Only 2,000 lbs trailer weight using the bumper hitch.
No, Dodge does not have a 5.4l
The 2002 Dodge Dakota takes 21" replacement windshield wiper blades on both sides front.
Remove the screws in the wheel wells and underneath the plastic cover to remove the bumper cover. Then you can see to remove the actual bumper.
They are the same from 1994 to 2002.