Want this question answered?
The starter on a 92 Buick LeSabre is replaced by disconnecting the battery, removing the retaining bolts, and lowering the starter. The wiring harness can then be disconnected and a new starter installed.
how to remove the starter from a 92 s-10 4x2 with a 2.8 engine
how to remove starter on 2004 Buick Rendezvous
there is 3 wires to the starter disconnect them. Then remove the mounting bolts and detach the starter the reverse to installation
Disconnect the - battery cable Raise and support vehicle Disconnect the wiring at top of starter Remove mounting bolts Remove starter
There are two engines for that particular year of century. Easiest way is to Follow the positive battery cable down to the starter. Disconnect ground on the battery. Remove any bracket or obstruction that blocks access to the starter,Loosen the two bolts that hold starter to the engine, if there is a heat shield, remove it.As you lower the starter, remove the two wires on the starter solenoid. At times you need to wiggle, twist , or turn the starter to remove it if you are in real close quarters. Reverse procedure.
Disconnect the - battery cable Raise and support vehicle Disconnect wiring at the top of starter Remove starter mounting bolts Remove starter
Disconnect the- battery cable Raise and support vehicle Disconnect wiring harness at top of starter Remove starter mounting bolts Remove starter
where are the two bolts located on the starter?
Remove the positive cable from your 1992 Chevy Lumina battery. Remove the cables from the front of the starter. Remove the starter retaining bolts. Reverse the process to install your new starter.
1994 buick regal inner tie rod ends
Remove the crossmember and drop it out the bottom no problem.