0
Prep work. If you can, go to a self wash car wash and clean the area really good. Remove the battery positive terminal connector. Place the car on a jack and remove the right wheel to get access into the wheel cavity. It can be done in place but its easier if removed. There is a metal cover in the wheel cavity that is removed to gain access to the starter. Remove this. Now disconnect the connections on the motor. one is a 10mm nut and one a push in connector with a tab to hold in place. Once off there are 2 bolts holding the starter on. I suggest doing the one underneath first since the other can be done easily. Once lower one is all the way out then loosen the top one and remove it. You can just slide the starter out the wheel cavity. Then reverse order to install. Just don't tighten down the bolts completely until both of them are in and snug.
Note: I take off the brush guard to gain access to the lower bolt. Seems like this takes time but I find it easier in the long run to remove the lower bolt this way.
Wiki User
∙ 14y ago
Add your answer:
Earn +20 pts
Where is the starter on a 1992 v6 4Runner?
The starter for your 1992 is located behind your passenger side wheel well. Remove tire and you will see a panel at the top of the wheel well remove it and the starter is behind that.
How do you fix a 1992 Toyota 4runner heater core?
How do you bleed the heater after changing coolant in a 1992 4runner
Where is the starter located on a 1992 Toyota Cressida?
The starter is located on the driver side of the under the intake maniford it has two bolts 14mm to remove it.
What is the towing capacity of a 1992 Toyota 4Runner?
5,000 lbs. is what I saw
Where is the intake air temperature sensor on a 1992 Toyota 4runner 3.0ltr?
The intake air temperature sensor on a 1992 Toyota 4Runner will be found on the intake system. The unit is clipped into the plastic piping of the intake.
Where is the starter solenoid location on a 1992 4runner?
Under hood in a fuse box.
What type of oil does a 1992 Toyota 4runner sr5 use?
10w 30
Where is the starter located on 1992 Toyota Corolla Automatic?
it is under the intake manifold. very hard to see and no fun to remove.
How do you rebuild a starter for a 1992 Toyota Corolla?
get a rebuilt you will be better off
Where is the fuel filter located on a 1992 Toyota 4Runner?
The fuel filter 4runner v6 sr5 is located under the car, underneath the the front passenger seat behind the chassis..
How many quarts of transmission fluid should you put in a 1992 Toyota 4Runner?
Your 1992 Toyota transmission will hold 12 quarts of transmission fluid, when it is empty. You can check the transmission fluid level with the dipstick.
How do you remove the starter on a 1992 Toyota 4 WD pick up truck?
jack up front of vehicle and support proprely.remove r/f wheel and rubber dirt shield.this opening in the wheel well will be big enough to remove starter after disconecting.
