Want this question answered?
You will have to take the 2001 Chevy Malibu to a mechanic to have stripped and broken plugs removed. It needs a special tool to get the broken ones out.
its broken
Turn it counter-clockwise
I do not understand why you want to remove the porcelain if it is broken off. Just remove & replace the spark plug which is no longer any good if the porcelain is broken.
This is a specialist job and needs to be handeled by one, Sometimes the head needs to come off. Take it to a garage.
Disconnect the battery, remove the intake manifold, remove the spark plug boot covers and cables, and remove the old spark plugs. Put in the new spark plugs, attach the spark plug boot covers and cables, replace the intake manifold and connect the battery.
Disconnect the battery, remove the cables to the spark plugs and the boot covers, and remove the old spark plugs. Next, put in the new spark plugs, reattach the boot covers, reattach the wires and reconnect the battery.
On the 2.3L and 3.0L engines, remove the top plastic engine cover and remove the rubber spark plug wires (4 of them for the 2.3L and 6 of them for the 3.0L) to gain access to the spark plugs.
For a 2000 Mazda 626, the spark plugs are located underneath the engine manifold. In order to remove these, you must first remove the spark plug wire boots by turning upward in a left to right motion. Afterward, use an insulated spark plug socket, extention and driver to remove the spark plugs are they are inches beneath the manifold. Be sure to properly gap the spark plugs, use anti-seize compound, and properly re-attach the spark plug wire boots.
with a 10mm socket remove the two ignition coils and the two spark plug wires, using a 5/8 spark plug socket and one long extension and a ratchet remove the spark plugs and install the new ones
You use an eas-out.
Where are the spark plugs on a 2004 mazda rx8?