go to an auto store and get a can of PB Blaster it works great you simply spray it on and wait a few minutes GOOD LUCK
miki
You have to unscrew the tensioner bolt and remove the serpentine belt first, then change the pulley and replace the belt.You have to unscrew the tensioner bolt and remove the serpentine belt first, then change the pulley and replace the belt.
It pulls up, do not unscrew
Remove the ligth assy and unscrew it from the rear.
go in your trunk and there are covers where the brake lights are...remove covers, unscrew plastic nut, and remove light...
remove plastic moulding around door handle and door lock. unscrew door handle and unsnap plastic anchors around lower portion of door unscrew door panel from door. lift up on panel and remove. remove plastic. unscrew motor from door , let window down and remove two screws holding window. remove motor and metal bar replace and reverse process. 1991 Nissan maxima
Unplug your battery, pull off the connector, unscrew the bolt and remove the switch then replace and work backwards.
The bulbs unscrew counterclockwise from the back of the light assy. Sometimes you ave to remove the light to get to it.
You should just be able to unscrew the back of the key. if not the dealer has a tool to take them apart.
You have to unscrew front right engine mount from bottom and lift engine (not remove).
Remove Trunk Carpet. Remove 3 Phillips bolts holding cover. Remove Clip and Hoses. Unscrew larger ring holding down pump. Remove and Replace in reverse order with new pump.
Most engines have the temperature sensor either at the top water inlet or on the side of the block. Remove the sensor wiring, then unscrew the sensor to replace it.
Inside the trunk remove the fasteners that hold carpet on backside of lamp's. Then you can unscrew the caps that hold the light. Remove from car and replace the bad bulbs. Its really not hard at all.