drill it out with a power drill
The EGR valve is located at the front of the h22a4 engine. The EGR valve is right beside of the front of the EGR valve.
195-200hp
1342 clockwise
195hp + you can get tuned this motor
Yes, it will fit with some minor modification. Other popular swaps are the h22a1, h22a4, h22a and h23.
The series of the Engine. The H22 came in many variations. In the US, the H22A1 was the motor found in Vtec models of the Fourth Generation Prelude. The H22A4 was found in 5th generation Preludes. The H22A1 is rated at 187 HP and 158 ft-lbs of torque The H22A4 is rated at 197 HP and 156 ft-lbs of torque.
yes it wil only the h22a4 crank wont fir with the others
pcv valve replace every 30000 miles.. bad oil pan gasket, or valve cover gasket
1997 HONDA PRELUDE 2.2L 4-cyl VIN Code H22A4 TORQUES Oil Drain Plug.....33 ft-lbs Manual Transmission Fill Plug.....33 ft-lbs Drain Plug.....29 ft-lbs
No. Your choices are limited by your funds and how much you wish to alter the frame. A good choice would be the H22A, H22A4, The B16A2 or if your budget is low, the D16Y8.
Have you checked the fuses? Different circuits have different fuses. It may be your wiring harness, but check the fuses first.
I"m not sure if this even has a CAS, but if it does you'll see a wiring loom going down behind the crank pulley. If there's no loom down there, no CAS. I'm working on a 94H22 with no CAS, so I'm sure if yours would have one due to the different years, but if it does, that's where it'd be