Want this question answered?
REMOVE THE BED OF THE TRUCK. YOU CAN GET TO THE BOLTS TO REMOVE THE TANK. 6 BOLTS AND UNPLUG THE WIREING HARNES.
two screws on the top of the cover, need to look from under the steering colum, from under the dash you may be able to stick your hand and unplug the wireing harnes and speedometer, when you pull it out tip the top down since is got clamps on the bottom part and push the bottom to the back to remove it.
The population of Harnes is 13,797.
How to remove the factory radio and disconnect wirring harnes in a 2004 f150 ford truck
The area of Harnes is 10.76 square kilometers.
Did you take the old ( PROM ) out ? And install it in the new computer. If its a old or used computer it may not be any good. I would check the wireing harnes were it plugs into the computer colsely
First find blower moter unplug wireing harness vse voltmeter to test supply end of wireing harnes for voltage if there is voltage replace motor (make sure your fan is turned on when doing this) if no power go to your local library and find the wireing diagram for the HVAC start at blower moter and follow it back to power source this will tell you what componets E.G. relays and other switches. are in line test each one tell you find the culprit. On my 96 the blower motor is under the dashbehind the glove box
22re rod bolt torque
what does the ignitor assembly do on a 87 toyota 4runner(22re)
Plain and simple you dont. The wireing is integrated through out the car and its not a DIY kinda job.
well if the 1985 did have a 22re ya it wold fit on a 1993 but since they didn't have the 22re in 1985 yet you probably have a 22r or a 20r in the 1985. i would recommend just buying a reconfigured head for the 1993 22re they are cheep like 2-400 bucks then you know its all new and will work
nothing 22ris carberated and a 22re is efibut the basic motor is the same