the clutch on your A/C compressor needs to be replaced.
there are three bolts under the transmission case by the converter clutch butterfly valve take them off and its under there but make sure you have completely removed the gasket
To replace the AC clutch discharge the freon, remove the clips, and remove the screws under the bumper. Remove the driver side headlight, and bolts.
no, unless u have to remove the compressor unit. The clutch can be replaced with out removing the compressor if you have room to do it.
They require a puller.
This requires special tools to remove and install the ac clutch and bearing. The air gap on the ac clutch must be done during install.
how do you adjst clutch on 87ford f150
You need a Z7 Clutch puller.
How do i remove an air compresser in a GMC Cheyene
The AC Clutch on that year truck is conected to the compressor, Unfortunately there is no way to separate the both. You must pick up a new compressor if your clutch has failed...
AC Compressor clutch relay may be stuck. Remove the relay and see if the clutch releases.
You needa specialtool to remove it and install it. You will need to measure the air gap between the clutch plate and pulley as you install it, .010" to .015" will usually do it.