They require a puller.
It takes a special puller. Your local auto parts store should have one available.
To replace the AC clutch discharge the freon, remove the clips, and remove the screws under the bumper. Remove the driver side headlight, and bolts.
no, unless u have to remove the compressor unit. The clutch can be replaced with out removing the compressor if you have room to do it.
This requires special tools to remove and install the ac clutch and bearing. The air gap on the ac clutch must be done during install.
You need a Z7 Clutch puller.
How do i remove an air compresser in a GMC Cheyene
The AC Clutch on that year truck is conected to the compressor, Unfortunately there is no way to separate the both. You must pick up a new compressor if your clutch has failed...
AC Compressor clutch relay may be stuck. Remove the relay and see if the clutch releases.
You needa specialtool to remove it and install it. You will need to measure the air gap between the clutch plate and pulley as you install it, .010" to .015" will usually do it.
there is a tool called a "clutch removal tool" that can be purchased from j c whitney.,
My 99 is in the shop as we speak for a compressor. I have heard that some people replace only the clutch...
the Clutch is not fully disengaged. compressor might need to be replaced. I would bring it to the shop. Look at the Compressor and if u notice shavings then it has done its duty. If you do not want the AC anymore and want a cheap fix. Just go to a AC shop and get them to remove the clutch. the Clutch is not fully disengaged. compressor might need to be replaced. I would bring it to the shop. Look at the Compressor and if u notice shavings then it has done its duty. If you do not want the AC anymore and want a cheap fix. Just go to a AC shop and get them to remove the clutch.