0
How do you remove an engine pulley from a craftsman 917.252610 mower?
Wiki User
∙ 7y ago
Pulleys are held on to shafts by either a bolt in the bottom or a set screw in the side, loosen them and use a gear puller.
Wiki User
∙ 7y ago
Add your answer:
Earn +20 pts
How do you repair a crankshaft pulley for a 98 Saturn SC2 DOHC?
u need to buy new pulley then, remove serpentine belt from engine remove bolts that hold pulley to crankshaft remove pully instalation is exact opposite of removalAnsweru need to buy new pulley then, remove serpentine belt from engine remove bolts that hold pulley to crankshaft remove pully instalation is exact opposite of removal Answeru need to buy new pulley then, remove serpentine belt from engine remove bolts that hold pulley to crankshaft remove pully instalation is exact opposite of removal
How do you remove and install a 1998 Nissan altama idler tension pulley The pulley the space between the pulley and body of car is only about an inch does not have enough room to pullout?
The idler pulley is mounted on a plate that needs to be removed. In order to remove the plate with the idler pulley, you must remove the engine mount to get out the idler pulley. To remove the engine mount, you need to jack-up the engine from the bottom of the oil pan (Note: place a piece of wood plank between the bottom of the oil pan and the jack). The idler pulley is mounted on a plate that needs to be removed. In order to remove the plate with the idler pulley, you must remove the engine mount to get out the idler pulley. To remove the engine mount, you need to jack-up the engine from the bottom of the oil pan (Note: place a piece of wood plank between the bottom of the oil pan and the jack).
How do remove a 1996 Chrysler damper pulley?
Depending on engine displacement in general remove belt-s then bolt holding pulley to the crankshaft then using a puller remove the pulley, when installing use a installer not a hammer to put the pulley on the crankshaft.
How do you remove crankshaft pulley bolt from a 1999 Nissan maxima 3.0 l?
I unhooked all the coils(6) so the engine would not crank. I used a Craftsman 1/2 in ratchet and a 3/4 in impact socket and put the ratchet frame against the passenger side axial and bumped the engine over and this released the bolt. I then used a Craftsman 2 arm puller without a wrench to pull the pulley off (I put the bolt back in and that's what I pried against with the puller) and with just hand pressure removed the pulley.
How do you remove engine crank pulley 1998 jetta?
Loosen the 18mm bolt about 4 or 5 mm and give the bolt a good wack and the pulley should pop. Then remove the bolt and pulley.
How do you replace the water pump belt pulley located on a 1991 Buick Park Avenue?
You have to remove the engine mount next to it, then remove the 4 bolts in the pulley
How do you replace the idler pulley on 1992 350 engine?
Remove the old, damaged idler pulley and replace it with a new one.
How to replace the tensioner pulley on a 2001 galant gtz?
Remove air box, pulley is located just under attached to engine block. Should remove bolts take off belt, and replace pulley and belt.
How do you remove crankshaft pulley Mazda 626 1993?
Im not sure which direction the bolt turns to remove the pulley...the crank shaft turns in clock wise direction when engine is running.
How do you remove the crankshaft pulley?
In most cases you need a pulley puller. Need to know make, model , year and engine to help you more.
How do you get the serpentine?
To get the serpentine belt off an engine fan, loosen the tensioner pulley. This pulley is the one with a bolt in a slot that can be adjusted. Then remove the belt.
How do you remove the power steering pulley from a 2002 Chevy Suburban w 4 wheel drive?
This requires a special tool to remove and install the pulley. Most auto parts stores should have one in stock Best to remove the pulley with the pump removed from the engine compartment.
