0
The ignition control module is located behind the 3 coil packs on the front of the engine, beneath the front valve cover. Removing the fan shroud will help give you more room to work but it is still a tight space to work. The Coils are mounted on top of the ignition control module, so you will have to remove them from the whole assembly. If you look at the assembly behind the coils and see the wires hooking to it then look for the bolts holding them in place. Make sure to par attention to the location of the coils and wires coming from the spark plugs. The ignition control module is located behind the 3 coil packs on the front of the engine, beneath the front valve cover. Removing the fan shroud will help give you more room to work but it is still a tight space to work. The Coils are mounted on top of the ignition control module, so you will have to remove them from the whole assembly. If you look at the assembly behind the coils and see the wires hooking to it then look for the bolts holding them in place. Make sure to par attention to the location of the coils and wires coming from the spark plugs.
Wiki User
∙ 15y ago
Add your answer:
Earn +20 pts
How do you change the Ignition Control Module in a 1995 Blazer S-10?
Remove the wiring harness from your 1995 Chevy Blazer ignition control module. Remove the ignition control module retaining screws. Reverse the process to install your new ignition control module.
How do you change ignition control module 1995 Buick Riviera?
Disconnect the battery. Remove the ignition coils. Remove the ignition control module that was under the coils, and replace it.
How do you remove the ignition module on a 1988 ford f-250?
how do you remove the ignition control module on a 1988 ford f-250 pickup?
How do you remove ignition control module on a Mercury villager?
The ignition module is integral to the distributor and is not serviced as as separate part.
Where is the ignition control module located 0n a 2002 Pontiac g p?
both the 3100 and 3800 series engines have the ignition control module mounted under the coil packs. remove the coil packs and there it is.
How do you replace ignition module in a 98' Malibu?
Remove the ignition module retaining ring. Pull the ignition barrel out. Remove the wiring harness from the back of the ignition barrel. Reverse the process to install the new ignition module.
How do you change an ignition control module?
Remove 2 bolts. LOL mine is located on the throttle body
Where is the ignition control module on a 1993 Chevy G20?
In the distributor,you need to remove the dist cap & then remove the rotor and it will be mounted to the distributor housing
Where is the ignition control module on a 2001 Pontiac Sunfire 2.2L engine?
The ignition control module is located on the left side of the engine, it is what the coil packs are attached to. If you remove both coil packs and unplug the two connections it will come right off.
Where is the ignition control module located in your 1996 Chevy Tahoe?
On the 96 Tahoe, 5.7L V8 the ignition control module is on a plate in front of the distributor on the passenger side of the engine. It is next to the coil pack. Original Answer: It is in the dist. remove cap and you will see it.
How do i change the ignition module in a 1998 suburban?
Begin by removing the wiring harness from your 1998 Chevrolet Suburban ignition module. Remove the ignition module retaining screws. Reverse the process to install your new ignition module.
Where is the ignition control module on 91 Chevy pick up you?
The ignition module is screwed to the base plate of the distributor. Remove the distributor cap and rotor. Remove the two screws that hold it to the base plate. Unplug the two wiring clips from each end and replace.
