0
To remove the ignition control module from a 1990 Hyundai Excel, first disconnect the negative battery cable to ensure safety. Locate the ignition control module, which is typically mounted on the firewall or near the distributor. Unplug the wiring harness connected to the module and remove the mounting screws. Finally, carefully lift the module off its mounting brackets.
What else can I help you with?
How do you change the Ignition Control Module in a 1995 Blazer S-10?
Remove the wiring harness from your 1995 Chevy Blazer ignition control module. Remove the ignition control module retaining screws. Reverse the process to install your new ignition control module.
How do you change ignition control module 1995 Buick Riviera?
Disconnect the battery. Remove the ignition coils. Remove the ignition control module that was under the coils, and replace it.
How do you remove the ignition module on a 1988 ford f-250?
how do you remove the ignition control module on a 1988 ford f-250 pickup?
How do you remove ignition control module on a Mercury villager?
The ignition module is integral to the distributor and is not serviced as as separate part.
Where is the ignition module located on a 2004 Hyundai Santa fe?
The ignition module on a 2004 Hyundai Santa Fe is typically located near the ignition coil, which is situated on or near the engine block. To access the ignition module, you may need to remove the engine cover and other components for better visibility. It's advisable to consult the vehicle's service manual for specific details and diagrams.
Where is the ignition control module located 0n a 2002 Pontiac g p?
both the 3100 and 3800 series engines have the ignition control module mounted under the coil packs. remove the coil packs and there it is.
How do you replace ignition module in a 98' Malibu?
Remove the ignition module retaining ring. Pull the ignition barrel out. Remove the wiring harness from the back of the ignition barrel. Reverse the process to install the new ignition module.
How do you change the ignition control module on 1995 Monte Carlo z34?
To change the ignition control module on a 1995 Monte Carlo Z34, first disconnect the battery to ensure safety. Then, locate the ignition control module, which is typically mounted on or near the ignition coil. Remove any wiring harness connectors and unscrew the module from its mount. Install the new module by reversing the removal process, ensuring all connections are secure before reconnecting the battery.
How do you change an ignition control module?
Remove 2 bolts. LOL mine is located on the throttle body
How do you replace ignition control module on a 1993 ford e350?
To replace the ignition control module on a 1993 Ford E350, first disconnect the negative battery cable to ensure safety. Locate the ignition control module, typically mounted near the distributor or on the firewall, and remove the electrical connectors. Unscrew the module from its mount, replace it with the new module, and reconnect the electrical connectors. Finally, reconnect the battery cable and test the ignition system to ensure proper operation.
Where is the ignition control module on a 1993 Chevy G20?
In the distributor,you need to remove the dist cap & then remove the rotor and it will be mounted to the distributor housing
Where is the ignition control module located in your 1996 Chevy Tahoe?
On the 96 Tahoe, 5.7L V8 the ignition control module is on a plate in front of the distributor on the passenger side of the engine. It is next to the coil pack. Original Answer: It is in the dist. remove cap and you will see it.
