answersLogoWhite

0


Best Answer

there are 2 ways to do it. if you are lucky there is an easy way. remove the bottom cover on the dash and around the digital dash. disconnect 2 plus from the back of the switch (not fun). then using a very small flat head screwdriver, finagle it in on the bottom of the black switch panel. there is a clip on the bottom tha holds it in so pucshing it up allows it to come free. that is the easy way, which didn't work for me. i had to take out the whole side of the dash over there. now it works! just a warning....those switches are a little spendy. also check to make sure that your circuit in the fse box is ok. its a 20amp. also under the steering there are some relays which one is for the headlights. they are all the same. try switching them to see if you get your lights back. and those relays are way up there. hope this helps owner of 93 fleetwood brougham.....d-body

User Avatar

Wiki User

17y ago
This answer is:
User Avatar

Add your answer:

Earn +20 pts
Q: How do you remove and replace a headlight switch on 1993 Cadillac Fleetwood Brougham?
Write your answer...
Submit
Still have questions?
magnify glass
imp
Related questions

How do you replace the rear wheel bearings on a 1987 Cadillac Fleetwood Brougham 5.0?

They are pressed in the axle. Take it to a garage.


How do you replace a lower level ride on a 1994 Cadillac fleetwood brougham?

change over to air shocks on rear end


How do you replace fuel pump Cadillac Fleetwood?

How to change fuel pump in 1985 cadillac fleetwood


How do you replace a starter on a Cadillac Fleetwood front wheel drive?

How do you replace a starter on a Cadillac Fleetwood front wheel drive Where is the starter located? Is this a difficult job I should pay someone to do or a regular joe and do this.


Why doesn't my speedometer work while I am driving my 1992 Cadillac Brougham?

Replace the fuse.


Why is there an error code on the digital dash where the mileage is supposed to be on a 1992 Cadillac brougham?

replace it or get the one in your dash fixed because they have a lot of bugs in those digital dashs not working right i had to replace mines in my 91 cadillac brougham. good luck.


How do you replace a 1994 Cadillac Fleetwod brougham rear axle?

hire someone hire someone


How do you replace a heater core in a 1987 Cadillac Brougham?

Try the repair tips on the Autozone web site.


Why is your car not starting after running out of fuel then refueling on a 1994 Cadillac Fleetwood?

Clogged fuel filter, replace.


Where can you find a diagram or get instructions to replace the V-belts for a 1990 Cadillac Brougham 305 RWD V8?

See if your public library has a Chilton's book for your Cadillac.


How do you replace a starter on a Cadillac Fleetwood?

Front or Rear wheel drive?It varies according to the year and whether it is front wheel or rear wheel drive. Please expand your question. front wheel drive where is the starter for the cadillac fleetwood 1990


Cadillac engines from 1980 to 1992?

.112= 1.8 .121= 2.0 .173= 2.8 .249= 4.1 .252= 4.1 .262= 4.3 .273= 4.5 .300= 4.9 .307= 5.0 .305= 5.0 .350= 5.7 .368= 6.0 In 1980 Cadillac offered a .350 diesel engine as standard equipment for the Seville and optional equipment for the Fleetwood Brougham and Eldorado. The gasoline .350 was optional for the Seville and Eldorado. They offered a .368 as standard equipment for the Fleetwood Brougham, De Ville, and Eldorodo, and as an option for the Seville. In 1981, the .252 V6 (built by Buick) was offered as an option for all models. The .350 diesel was still standard for the Seville and option for the Fleetwood Brougham and Eldorado, and it was offered for the De Ville. The .350 was not offered in gasoline. The .368 was made a the V8-6-4 variable displacement engine and was standard for the De Ville, Brougham, Eldorado, and Optional for the Seville. The .368 that was used in 80 was available for commercial chassis only. In 1982, the .112 straight 4 was available for the Cimarron. The .249 was introduced and made standard for all Models, except the Cimarron. The .252 and the .350 diesel were made optional for all Models, Except Cimarron. The V8-6-4 was made standard for all limousines while the .368 was standard for all other commercial chassis. 1983, the Cimarron was upgraded to the .121 engine. All stayed the same until 1985. 1985 the Cimarron received a .173 V6 engine as an option. the .249 was made standard for the Fleetwood Brougham, and limousines. A higher horsepower front wheel drive, .249 was standard on the De Ville Seville, and Eldorado. A .262 diesel was offered as an option for the front wheel drive cars and the .350 diesel was optional on the Fleetwood Brougham. In 1986 the Fleetwood Brougham line split into two lines; the Fleetwood and Brougham, where the Brougham remained rear wheel drive and the Fleetwood became part of the De Ville line and front wheel drive. The .249 was standard equipment on the Fleetwood, De Ville, Seville and Eldorado. The Brougham received an Oldmobile .307 as standard equipment. In 1987, the Cimarron's optional .173 became standard equipment. Cadillac added the Allante to its line, and it received the .249 engine. All other engines stayed the same. In 1988 Cadillac added the .273 engine and made it standard equipment for the Seville, Eldorado, De Ville and Fleetwood. In 1989 The Cimarron was discontinued and the Allante was upgraded to the .273. The Brougham continued with the .307 for both years. In 1990, the .350 gasoline engine was brought back and made as an option to replace the Brougham's .307. For 1991 and 1992 the .307 was replaced with a Chevrolet .305 and the .350 was still optional. Cadillac added a new .300 engine for the De Ville, Seville, Fleetwood, and Eldorado. The Allante retaine the .273.