Want this question answered?
There are four mounts on a Chrysler Sebring.There are four mounts on a Chrysler Sebring.
No.
Carefully place a jack with a block of wood under the motor, loosen mounts from motor, jack motor up just enough to remove old mounts, replace mounts, lower motor onto new mounts, tighten motor to mounts. Make sure there aren't any hoses, wires, lines, etc. that may tear while lifting the motor.
Carefully place a jack with a block of wood under the motor, loosen mounts from motor, jack motor up just enough to remove old mounts, replace mounts, lower motor onto new mounts, tighten motor to mounts. Make sure there aren't any hoses, wires, lines, etc. that may tear while lifting the motor.
Remove motor mounts and raise motor approximately 4 inches.
Transmission mounts are they considered motor mounts? After saying that how many motor mounts do I need to replace, if I change out all of them.
Remove wiper arm then remove inside trim panel being careful not to crack it then remove motor connection then motor
four
To replace the motor mounts on a PT Cruiser, the motor must be held in place and kept from falling with jacks designed to hold the weight. Then the old mounts can be removed and new ones put in. If the motor mount is not readily accessible from the top, some engine parts might need to be removed, like the battery. Never go underneath the vehicle to remove the old motor mounts.
replace one side at a time, take the bolt out that goes through the mount and jack motor up on that side and replace the mount.
It will cost approximately $400 to replace the motor mounts on your Honda Accord. The motor mounts will cost approximately $100, the rest of the cost will be labor.
well, how do you replace the motor mounts on this car?