PULL SEAT UP A LITTLE AND YOU WILL SEE A RECTANGLE CUT OUT ...PUT A LARGE FLATHEAD IN IT AND PRY UP.....THERE IS ONE OF THESE ON BOTH SIDES
Under the back seat
IF IT IS THE SAME LOCATION AS A '93 THEN IT IS UNDER YOUR BACK SEAT PASSENGER SIDE
Need to take out back seat
IF IT IS THE SAME AS A '93 IT IS UNDER THE BACK SEAT PASSENGER SIDE
First you remove the lower back seat, and the bolts that secure the upper will be exposed. Remove them and lift out upper back seat.
Take out the bench seat, and remove the back, take a look. Holes are small.
Push back on the front bottom of the bench (takes a lot of pressure) to release clips Lift up to remove bench, this will expose clips or bolts holding the top of the seat in place Remove bolts or clips and push up on the rear of the seat to release upper clips to remove back of seat
Remove the two Allen bolts at the rear end of the seat with a hex wrench, then slide it back.
remove back up tire in back right behind seat
there are two bolts in the back of the seat. remove them and then slide the seat back about an inch and remove
you need lots of tools to do that then take it out carefully
how to remove 2004 scion back seat