id like to know the same thing. i have a 1995 Honda ATV. and i cant get the rear brake drum off
how do remove the brake drum on a 1991 mazda 323
How do you remove rear brake drum from a 1993 Toyota pickup?
You can remove the front brake drum, on your Kawasaki Mule 2500, by removing the wheel and axle. The brake drum will slide off.
how do you remove the drum the wheels are off
how do you remove rear brake drum on a suzuki 2004 xl7
If you're trying to remove the brake drum, be sure to NOT have the emergancy brake on. Remove the wheel and tap the drum with a rubber mallet until it releases, That's it!
Remove the tire and hammer on the front of the drum until it comes loose. 99% of the time, rust is holding it on super tight.
you have to take the 4 bolts off on the other side of the brake drum.then it should come off.
Light coating of grease on the axle flange before reinstalling, or create a wax paper gasket and put in before installing drum.
Better hope it is not a drum brake- it was originally equipped with a disc brake caliper.
How to remove. 1988-1995 Kawasaki Klf Bayou 220 rear brake drum. 1. Remove the rear wheel 2. Pull the cover off the grove in the end of the brake drum. 3. Remove and discard the axle nut cotter pin. 4. Loosen and remove the axle nut and washer. 5. Slide the brake drum off the rear axle and remove it. Note: The brake drum should slide off the rear axle with little or no effort. If the brake drum is tight, Loose the brake adjuster. I hope this help's.
Remove wheel remove and discard lock washers on wheel studs if any Remove drum May have to "hit" with a hammer on one side while exerting pulling pressure on the opposite side to loosen
Remove the tire and wheel. Remove the brake pads and hardware. The drum should slide off. You may need to tap it with a hammer.
how to remove rear brake drum on 1994 cavalier
Remove wheel Remove brake drum Loosen and remove brake line Remove mounting bolts Pry wheel cylinder off brake shoes Install new cylinder Replace brake lines Replace brake drum Bleed affected brake line
To remove a stuck brake drum you will need to use a brake drum puller to get it off. Many auto parts stores have a loaner tool program where you pay a deposit for the tool and get your deposit back when you return it.
To remove the drum, beat it mercilessly with a very large hammer.
you must pull the axles, remove the bearings and then the hub/brake drum assmbly. comes off as one unit.
you get a towel and clean
The first step is to remove the tire. The rear brake drum will have what is known as a self-adjusting screw. This may need to be adjusted to pull the drum off, once you have the tire removed.
(1) Warped brake rotor (2) an out of round brake drum (3) a warped or damaged brake shoe.
Remove the tire and wheel from your 1988 Ford Ranger pickup truck. Remove the brake pads. When the brake drum is not loose you can tap on it with a hammer or mallet. Once the brake drum is loose it will slide off.
If it is a drum brake system, then you will have to remove the wheel ,drum, brake shoes, and hydraulic brake line , then remove and replace the cylinder with a new one re-assemble and bleed the hydraulic brake system