put the car in drive and crankshaft wont turn anymore. then you can take off the bolt
Disconnect the battery and remove the fan assembly and crankshaft belts. Remove the center bolt from the pulley and use a crankshaft pulley remover to pull off the pulley. You can usually borrow one from an auto parts store.
on the Chrysler engine (420a) you do need a puller and installer to deal with the crankshaft dampener pulley.
You need to remove the bolt, insert the special tool in the hole, and install a three jaw puller to pull the pulley off.
What tools do you need to remove the crankshaft pulley on a 1995 Honda Passport?
Depending on engine displacement in general remove belt-s then bolt holding pulley to the crankshaft then using a puller remove the pulley, when installing use a installer not a hammer to put the pulley on the crankshaft.
u need to buy new pulley then, remove serpentine belt from engine remove bolts that hold pulley to crankshaft remove pully instalation is exact opposite of removalAnsweru need to buy new pulley then, remove serpentine belt from engine remove bolts that hold pulley to crankshaft remove pully instalation is exact opposite of removal Answeru need to buy new pulley then, remove serpentine belt from engine remove bolts that hold pulley to crankshaft remove pully instalation is exact opposite of removal
yes it turns and it is very hard to remove without the proper tool, you need to go to your favorite auto part website and look for a crankshaft pulley removal tool
The crankshaft pulley unbolts from the harmonic balancer. The harmonic balancer can be removed from the crankshaft with a 3 bolt puller.
you just need a puller to take it off, it's not a special puller.
Remove crankshaft pulley& ballance
Hello! The crankshaft position sensor is located behind the crankshaft pulley,on the left side facing the front of the car.It is difficult to see and to remove it you need to remove the crankshaft pulley ( radiator,belts,.... )
It requires a three jaw puller and a special tool that is inserted in place of the bolt.