You will need a special 3 jaw puller and an insert for the puller to push against.
You'll need a puller you should be ablt to get a lon from on of you autoparts suppliers without this you will not be able to remove it Jim.
how do you remove the flasher relay in a 2000 dodge intrepid. I got it unplugged but don't know how to remove it
no those cars suck
Hi The 3.5L has a tapered shaft, you MUST use a balancer puller or you will damage the pulley. These pullers are under $30 bucks
no no
Check with your local auto repair shot to see if they rent tools. If so, they likely carry a crankshaft pulley remover. I'm in the process of changing the water pump on my 2002 Intrepid and I rented the tool. Now I have to find the installer because the one they had didn't fit my pulley.
i had the same problem with my 02 intrepid it was the idler pulley to the ac belt $19 to fix it.
Remove the belt, then remove the bolt holding in the idler pulley.
Which pulley are you referring to. There is 5 or 6 on that car.
Yes.
You remove the cap and pour it into the coolant bottle.
You have to remove the pan, there is no drain.