This is a relatively simple and straightforward procedure - HOWEVER - it is almost impossible to try to verbally describe the locations of some of the screws and retaiinng clips that hold this panel in place wihout the use of pictures. You can start by prying off the small trim cover at the base of the storage bin. That will expose the the first two screws that you will need to remove. Starting from that point (if you're careful and methodical) you may be able to figure out how to find the remainder of them as you go along. BEST METHOD - would be to try and borrow from the library a copy of the Hayne's Manual for this vehicle - or purchase one (they're GREAT for DIY'ers).
Why does a red light flashes PRG FI on the dashboard instructment panel of my 1987 Honda Civic
Changing a light on the instrumental panel requires removing the whole dashboard on a 1992 Honda Civic. Loosen and remove all the dash mounting screws and pull of the dash. Remove the cluster from the display and pull off the old bulb. Install the new bulbs.
Behind a pull-out plastic panel at the lower left edge of the dashboard.
how to remove the vent from dashboard of 1996 ford contour
Yes, in the fuse panel under the bottom of the left hands side of the dashboard.
If the fuse panel is remove on a 1999 Honda Civic a print out of the location can be retrieved from a local Honda Dealership service center or auto part store. The print out will detail locations of every fuse is their functions.
Remove the panel on the right side of the car The panel is under the glove box and conects to the center console On the back of the panel the fuses are labeled. Check all the 10 amp fuses
The model year is not given. Up through the early 2000's it was located hidden under the right side of the dashboard's center trim panel.
# Remove the center console # Detach the retaining screws from the center trim panel.Disconnect any electrical connectors and remove the trim panel
the panel just snaps off
The dashboard lights on a 1997 Eagle Talon can be changed by reaching up into the dash to get to the bulbs. Another way is to remove the dashboard screws and remove the front of the instrument panel.
You will need to remove the dashboard panel in order to replace the electronic throttle control light. With the dashboard panel removed the light can be access to be replaced.