Need special tool to release locks behind the small holes at the corners of radio Probably available at auto parts store
If you are referring to the factory supplied radio, it is not a 'component' type radio. It must be removed from the dash and dis-assembled.
how to remove the lines from the heater core on a 2001 expedition
Each 2001 Ford Expedition with key less entry has it's own factory code
no
Take a coat hanger, break it into four parts, insert the four hanger parts into the square slots on the 4 corners of the radio simulatanously and pull the radio out.
Begin by removing the decorative cover from your 2001 Pontiac Bonneville radio. Remove the radio retaining screws. Slide the radio out and remove the wiring harness and the antenna cable.
For a 2001 Ford Expedition : Open the drivers door , and on the latch pillar will be an information sticker It will show the original size of tires on the vehicle from the factory
255 70 16 is the factory size it came with.
Best thing to do when the radio is bad, is forget repairing it. Not cost effective. Check salvage yards if you want a factory radio, or just purchase an after market radio, and intall it.
there are slots at the bottom of radio slide both radio keys in and slide radio out
You can buy the radio removal tools on eBay or walmart for less than 15 bucks. The tool looks like a U and you get 2 of them to insert on both sides of your factory radio. After you insert the tools in those 4 little holes you should hear a click and the radio should come out.
To remove the radio check this link out. It gives instructions. www.installer.com/pdf/95-8152.pdf