Want this question answered?
On a 1995 Ford Aspire : If you stand at the front of the vehicle and look in the engine compartment the automatic transaxle fluid dipstick is in the area to the LEFT of your battery ( according to a drawing I was looking at of the engine compartment of a 1996 Ford Aspire )
you dont. a cadillac tech does
3.6 quarts ( 3.4 liters ) with engine oil filter change , according to the 1996 Ford Aspire Owner Guide for your 1.3 liter engine
With engine oil filter change , the ( 1996 Ford Aspire ) takes ( 3.6 quarts )
On a (1996 ) Ford Aspire , 1.3 liter four cylinder engine : With engine oil filter change : ( 3.6 U.S. quarts , 5W-30 is PREFERRED according to the Owner Guide )
It is on the front of the engine under the timing cover. First step is to remove the front bumber and put the lock carrier in the service position.
how do i remove the front fender to 1996 Oldsmobile cutlas supreme.
According to the 1996 Ford Aspire Owner Guide : ( 5W-30 is the PREFERRED oil ) Also , with engine oil filter change , the 1.3 liter four cylinder engine takes 3.6 U.S. quarts
According to one of Fords websites : For a 1996 Ford Aspire , 1.3 liter / 81 cubic inch four cylinder engine : Motorcraft AGS32C ( SP-436 ) spark plugs * copper / gapped at .044 inch
how to remove starter on 1996 chevrolet 2500 with 6.5 diesel engine
1996 caprice can you remove 4.3 engine and install a 5.7?
To remove/replace the engine on a mid-90's G series van, you must remove everything in front of the engine, from grill to radiator, and remove it from the front. You may need to remove the motor mount to crossmember bolts to allow the engine to move forward. It is best to keep the transmission bolted to the engine, as it will be easier to align, etc when you are ready to reinstall it. Keep in mind all the lines and wires will need to be disconnected, too. Get a Chilton bok and use it for reference.