you need to remove the door skins first there is a screw on the inside of the speaker cover that holds it on.
The 1992 Chevy Corvette front speaker covers are held in place with two retaining screws. Remove the retaining screws and the speaker covers will come off.
You will need to remove the front speaker covers. The speaker covers are held in place with two retaining screws. Remove the speaker retaining screws. Remove the wiring harness from the back of the speakers. Reverse the process to install your new speakers.
The speaker covers are held in with a screw, remove it and tilt it out away from where the screw was. then remove the screws holding the speaker in and remove the speaker.
Remove the speaker covers, by loosening the retaining screws. Remove the speaker retaining screws. Remove the wiring harness. The speakers will come out.
Easy..........TNT!!!!!!!!
remove door paaels u will need a screw drive idiot
pull out the speaker covers, get a 7mm socket, & remove the 2 screws..
Begin by removing the dashboard speaker covers on your 1989 Chevy S 10 Blazer. Remove the speaker retaining screws. Remove the speaker wiring harness. The speakers will come out.
The speaker cover's you are referring to, are they in the front or back of the vehicle. If in the front you have to remove the door panel. If in the back, just grabe yourself a flat head screw driver and carefully push under cover and pop out.
Remove the speaker covers. Each speaker cover is held in place with two retaining screws. Remove the speaker retaining screws. Remove the wiring harness from the back of the speakers. Reverse the process to install the new speakers.
Not sure about yours, but on a 94 Cav, just pull the grill covers off,( they pull straight out), remove 2 screws, and remove the speaker, on a 94, the speaker is 2" size. Not a hard job.
Small screwsriver pop the metal speaker covers off..easy access to speakers from there