there's a panel to remove located in the front drivers side wheel well.
Air filter is located behind the drivers seat (in a right hand drive) and is accessed from underneath the vehicle by unscrewing 1 wing-nut to remove the cover, then another wing-nut to remove the filter.
Turn the oil filter counter clockwise to remove it. If the filter has been overtightened, drive an old screwdriver into the filter to provide leverage when turning. Be careful so that you don't drive the screwdriver into the engine block.
i belive your fuel filter is in your gas tank drive safe
i belive your fuel filter is in your gas tank drive safe
When I asked how to remove a fuel filter for a 2001 Kia Sportgage I forgot to say it is a 2001 Kia Sportgage 4 wheel drive vehicle. Could you help me to know how to remove the fuel filter for a 2001 Kia Sportgage 4 wheel drive
Replace the fuel filter.
Change your air filter every 30,000 miles or sooner if you drive in dusty conditions.
you will need a filter tool and with the right tool it is very easy.. Answer 2 I assume you are talking about a JDM Surf. The easiest way to get to the oil filter is through the driver (Right hand Drive) wheel well. If you cant fit remove the tire. it is a pain in the butt if you just try to reach in through the top or bottom.
is there a special tool needed to remove the oil filter on 1990 buick skylark 4 cylinder front wheel drive?
Toyota 4 cylinder EFI engines have the fuel filter under the intake manifold. It can be tricky to get to and you may need to remove other parts to get in to it. If you have small hands and a cold engine you'll be way ahead. In the Hiace you have to remove the drivers seat and the panels under it, including the handbrake. In the Hilux you've got a lot easier access. Good luck.
In the transmission.
In order to change the drive belt on 2000 BMW 4 door 323I, you must remove the air filter box, loosen the hose clamp, remove the harness plus, and depress the clip to remove it. Unclip the hose from the air filter box and remove it from the vehicle. Next remove the fan and fan clutch assembly. Next remove the tensioner and remove the belt.