Find them and remove them
It has a multi-point fuel injection system with one injector on each cylinder.
Remove pressure from the fuel system. Remove fuel lines and the rails. Get a fuel injector puller to avoid the risk of damaging the injector. Remove the old injector and replace it.
how to remove fuel injector plug in on a 2007 chevy suburban 5.3
First off, a 1995 Dakota is fuel injected. The fuel line hooks to the injector rail.First off, a 1995 Dakota is fuel injected. The fuel line hooks to the injector rail.
Where is the fuel injectors
Yes.
Relieve the fuel pressure. Unplug the injector rail wire harness. Remove the two fuel rail mounting bolts and the small screw and clip that secure the lines to the exhaust camshaft housing. Pull strait out while wiggling the fuel rail. At the top of the injector,remove the clip and unplug the electric. Remove the clip on the bottom of the rail that holds the injector in. Pull the injector strait out. Check that the O-rings are still attached to the bottom of the injector and at the top. If not, CAREFULLY.. remove them from the holes that they were mounted in.
where on a 1995 ford f250 7.3 engine is the number 8 fuel injector located I have hod a buzz test done on the truck thay said the number 8 fuel injector was not working so I need to know wrere is the number 8 fuel injector is located
Yes it is a single point fuel injection system. What appears to be a carburetor is in reality a throttle body housing for the injector located inside. If you remove the air filter and look down the throat you will see the injector.
fuel pressure regulator
It means your fuel injector or computer are messed up. Your injector could be very clogged. Somewhere in your fuel system you have a problem. You should have a scanner plugged into your car and get the code, it should lead you to it or near.
disconnect the battery and disconnect the fuel line hookup to the fuel rail, remove the fuel rail support bolts and electrical connection. remove the rail from the engine. pull off each injector easily replace each fuel injector with seals. don't use the old seals.