0
Not sure what model year you've got... when I had to do it on an older one, the hinges were tacked onto the body, and you had to take a punch and drive out the hinge pins.
Wiki User
∙ 9y ago
Add your answer:
Earn +20 pts
Where do you add engine oil to a 82 Ford F150?
I have the same truck. Driver side of the engine, on top of the valve cover there's a cap with a hose coming out. Unscrew cap and add oil there.
How do you remove the steering wheel of a 1985 Ford F150?
Remove centre cap,undo nut(s) and drift off the spline.You may need to use a "puller" to achieve this.
Where is the ignition module located on a 1987 Ford F150?
under the dist. cap
Removing hubs on an automatic 1996 ford f150?
To remove hubs on an automatic 1996 Ford F150, first remove the silver cap that has 3 Torx screw using a Torx screw driver. Secondly, there is a snap ring inside the next part where those Torx screws came out of; remove it using the correct hub socket. The hubs come right off after removing the ring.
Is picture of distributor cap firing order for 1993 Ford F-150 available?
Is there a picture of distributor cap firing order for 2003 ford f150 4.2 engine
How do you remove horn cover Ford Laser 1988?
The rubber cap has a lip that goes over a metal rim. Use a small screwdriver at the edge to lift and remove,,Chris
How do you replace ignition coils 2001 ford f150?
take off the distributor cap see what you find.
1998 ford contour transmission leak from soda can sized cap with snap ring any idea what this cap is called or how to fix my problem?
It is called a servo. you have to remove the cover and replace the seal.
Your ford f150 is over heating i already changed out the thermostat what should i check next?
check the radiator cap, needs to be 13psi at least, i believe. that was my issue with my old ford, the cap was shot
Where is the ac low pressure port on 1998 ford F150?
low side is next to or on conpressor.has blue cap on low side red cap on highside
Where is the fuel cap release on the Ford Fiesta?
There isnt one, you just press and release the cover and remember..there is no filler cap underneath the cover!!
How do you add oil?
Find the cap at the top of the valve cover. Remove the cap and add the oil.
