Want this question answered?
how do i find and remove a govener on scooter
all you have to do is take it off, how hard can it be.
To remove the governor off a Baja 90cc refer to your owners manual. Many newer models do not have a governor.
With tools and a Yamaha repair manual.....
Yes. The THM125C has a governor. The governor is just below the speedometer sensor. 1986 Pontiac fiero service manual section 125C page 22.
disclaimer--this can make your scooter a "motorcycle" by law in some states open seat, remove four bolts, remove helmet compartment/seat assembly, bundle wires goes to a black/brown box, this is your ecu. pull back the plastic sleeve on this box, clip green wire. according to a dealer this gets you to about 42 mph.
The Yamaha Governor is attached to the top of the fuel pump. Remove the governor retaining screws. The governor will come off.
There is no governor to remove. Speed is controlled by the ECU.There is no governor to remove. Speed is controlled by the ECU.
If you are having problems with the engine, take the scooter in for repairs. Since it is a late model, I would think it is still under warranty. If you are wanting to remove the governor to get higher rpm's and more speed, DON'T DO IT. The governor plays an important part in maintaining the engine at optimum performance by governing maximum speed. If you remove the governor, you will be risking serious damage to the engine due to uncontrolled overspeeding.
Remove the Real Scooter Wheel and Brake (brake if not fitted to new deck)Loosen Scooter Handlebar Clamp and remove barsRemove headset cups and take out Scooter forksSimple you should be left with a deck. Transfer the new parts if compatible to the new Deck.
It has no governor, that you can remove. you can get your computer reprogramed
Most tuners/programmers will remove the governor.