Want this question answered?
disconnect the battery, remove the bolt in the center of the pulley, then use a harmonic balancer tool to remove it
need more info on what your question is, is it how to remove?
Check your timing belt, harmonic balancer and the either two or three belts that connect to the harmonic balancer
Use a harmonic balancer holding tool DenLors 648796 to keep the pulley stationary while loosening the bolt.
The bolt was incorrectly tensioned.
Counterclockwise.
Having E-Mailed Honda Austrlia , and recieved their answer from their technical department I can say that a 1998 Honda Accord V6 3litre harmonic balancer retaining bolt is 16MM x 1.5MM Pitch. i hope this helps. John G W
What tools do you need to remove the crankshaft pulley on a 1995 Honda Passport?
Use an impact wrench (1/2 inch works best) to loosen the harmonic balancer bolt. If you do not have one, you must keep the engine from rotating while loosening the bolt. Try leaving the serp belt on and add some more tension on the belt; then use a jerking motion to break free the bolt, you might get lucky...if that doesn't work remove the starter and insert something into the flywheel to lock it in place, then try to loosen the balancer bolt.
FORWARD. IF YOU ARE HAVING A PROBLEM GETTING IT LOOSE, TRY HEATING IT UP. HONDA PUTS LOCTITE ON THE THREADS. THIS SHOULD HELP.
no
Turn it counterclockwise.