0
Does a 1992 Honda Civic harmonic balancer bolt have a forward or reverse thread?
Wiki User
∙ 15y ago
Add your answer:
Earn +20 pts
Are the threads on the harmonic balancer bolt for a 93 dodge Dakota reverse or standard thread?
Standard.
Is the thread reversed on a Chevy Malibu 2001 harmonic balancer?
Yes, the bolt that holds the harmonic balancer in place on a 2001 Chevy Malibu is reverse thread. I learned that the hard way and stripped the head of my bolt down to nothing. And the bolt is almost impossible to find, because they no longer make them.
Is the threading for a harmonic balancer left or right handed on a 92 Toyota pickup?
harmonic balance has left hand thread
What thread is the bolt that holds the harmonic balancer to the crankshaft on a 350 chev?
It is a standered fine thread bolt, Grade 8
1989 jeep Is the harmonic balancer bolt righthand or lefthand thread?
Normal right hand thread. Counter clock wise to loosen.
How do you replace harmonic balancer on 1993 f 350 with 351 motor?
first remove serpintine? fan belt then remove large bolt in middle of harmonic balance. this bolt usually has left hand thread next with a harmonic pulley ,puller, remove harmonic balancer.when removing this, there is a key in the balancer and shaft if a new key did not come with new balancer,make sure not to loose the old one install new balancer with key.use the bolt to pull balancer up tight where it needs to be and use proper torque on bolt
Is the bolt for the harmonic balancer on a Nissan 3.0L left or right hand thread?
The bolt is just a standard right hand thread. Just took one out of an '01 Xterra.
Remove Taurus harmonic balancer?
Remove belt,4 pulley bolts and remove pulley. Remove harmonic balancer bolt and washer,reinstall bolt with out washer,just in about half way.You will need a harmonic balancer puller.These are not very expensive about $20.00 or borrow one from somebody.You just thread the correct included bolts into the balancer where you removed the pulley bolts and will be pushing on the reinstalled balancer bolt.The balancer should clear the bolt head without the washer.This is so you don't damage the threads in the crankshaft.
Does a 199 Toyota Camary harmonic balancer bolt have a forward or reverse thread?
It should be regular threaded "Lefty Loosey." If you are having problems getting it loose, try an air impact. If that does not work try hitting the side of the socket while the air impact is hammering. If that does not work carefully heat up the bolt head with a torch and try the impact again.
Is the harmonic balancer bolt reverse thread on a 2003 lancer es?
No its regular right hand thread, just tight as hell. If you cant get it off, go buy/borrow/grab a 24" breaker bar, stick it in the bolt, unplug your coil packs, put bar against hard ground, and tap the starter.
Are the threads on the bolt left or right thread where it goes through the harmonic balancer and in the crank on 1974 Chevy 350 c you engine?
They are standard right hand threads.
What is the thread pitch of the harmonic balancer retaining bolt on a 98 Honda Accord v6 3litre?
Having E-Mailed Honda Austrlia , and recieved their answer from their technical department I can say that a 1998 Honda Accord V6 3litre harmonic balancer retaining bolt is 16MM x 1.5MM Pitch. i hope this helps. John G W
