The bolt is just a standard right hand thread. Just took one out of an '01 Xterra.
harmonic balance has left hand thread
Normal right hand thread. Counter clock wise to loosen.
They are standard right hand threads.
Right
There is a good possibility that the harmonic balancer is bad...if it is, it'll destroy the belts and possibly more on the front (right side ) of the engine.
Right handed.
no, threads are right handed.
Take it off as you would a normal bolt. It is a 'Right Handed' thread. Use a breaker bar or impact wrench. I also used a breaker bar with a 15/16 inch socket. I place the breaker bar up against the frame and after removing the spark plug wires at the coil I tapped the ignition key. It took a while but eventually it came loose.
They are right handed. Turn counter clockwise to loosen.
Its under the harmonic balancer cover. You can see the wiring on the right (front) side of the cover. Pull the harmonic balancer to replace it, make sure you line-up the teeth right in the magnetic pick-up.
sounds like you broke the crank sensor that is mounted right behind the balancer.
You need to get a special harmonic balancer pulley. You can rent them from AutoZone for $70 (you get it back when you return it)...a normal harmonic balancer pulley WILL NOT work. Chrysler vehicles have their own pulley. It's a fairly simple procedure once you have the right pulley.