Easy one,
1st open the hood. You need a rachet and socket set, a 10mm should do the trick. On the side of the headlamp their are 2 screws. By side I mean on left or right of the lamps. After that just simply push and pull them out. If you need to remove the lighting bulbs just turn the socket counterclockwise.
Source:Chilton Repair Manual. 5yr owner Buick LeSabre/personal experience
The 1998 Buick LeSabre solenoid can be found on the firewall in the engine compartment. There will be three solenoids on the firewall.
How do you install a heater core on a 1998 buick lesabre
Disconnect the 98 LeSabre battery. Remove the alternator belt. Remove the alternator wiring. unbolt the alternator, remove it, and bolt the new one on. Reconnect the wiring, but the belt on, then reconnect the battery.
no
Open the hood to the engine compartment. Remove the headlamp wiring harness. Remove the headlamp assembly retaining bolts. The headlamp will come out.
The 1998 Buick LeSabre custom sedan has a curb weight of 3,443 pounds. It has a wheel base of 110.8 inches and a ground clearance of 5.5 inches.
I have a 1998 Buick LeSabre and to remove the headlights there are two screws on the front just to the inside of the high beam. Once you take these two screws out the headlight should slide towards the outside of the car and you can unplug the wire connector and you now have ht headlights off.
165432
10 30
yes
Dex cool
Struts on a 1998 Buick LeSabre are changed by jacking the vehicle up, removing the wheel, and unbolting the strut. It can then be pulled from its mounts and a new strut put in place.